Cobraworxshopz Technicians can professionally repair, re-tune and modify the following makes of Radio Transceivers;
WORXSHOPZ FACILITY
Utilising the latest Marconi Test Equipment, Cobraworxshopz Technicians are experts at diagnosing faults to component level and specialise in repairing a wide variety of Radio Electronics and other Electronic devices. Our Worxshopz Facility has fully complimented soldering re-work Stations enabling our Technicians to repair to SMD pcb level including multi-layer and double-sided pcb's, Surface Mount Technology (SMT). Cobraworxshopz have a strict anti-static policy and all work benches, Technicians and associated tools are fully protected to prevent static discharge. Cobraworxshopz Test equipment is yearly calibrated for accuracy and our Technicians use Fluke digital Multimeters, Bird through-line watt meters and a range of analogue and digital storage Oscilloscopes. All of our Technicians are fully qualified Electronic Engineers with a keen interest in Radio related Technology.
Cobraworxshopz Technicians can install various add-on boards, Roger Bleeps, Echo boards, Frequency counters etc, We can make Coaxial patch-leads and re-wire Microphones and produce Microphone adaptor cables to Customer specific requirements.
ANTI-TAMPER SEALS (Information) All completed Transceivers are returned to the Customer with COBRAWORXSHOPZ ANTI-TAMPER SEALS. The Seals have an individual Serial Numbered Date-Code attached. The Transceiver's Serial Number is matched with the Anti-Tamper Seal numbers for easy identification and Warranty purposes. If you have a Transceiver without our Serial Numbered COBRAWORXSHOPZ ANTI-TAMPER SEALS then simply, we did not Service or Sell theTransceiver.
CONTACT US
Please call or SMS Cobraworxshopz.com 07508-148-148 outside UK+44-7508-148-148 or email service@cobraworxshopz.com for your specific requirements.
A small selection of our Services and pricing;
Cobraworxshopz.com - Clean-up-essentials.
Please call for ourlatest stock levels and Original 148 GTL-DX Faceplates. *NEW* see our "Buy it Now" Shop Page - ALL prices include UK Tracked P&P
Cobraworxshopz.com - Frequency Counter 'Retro-Fit' Modification.
No 148 or 360 is complete without our 'Retro-Fit' Frequency Counter Modification. Fee£55.00 includes NEW Frequency Counter, Wiring Loom & Socket installed into your Transceiver.
Cobraworxshopz.com - I.F. Gain Modification.
Increase your Transceivers receiving capability without loosing any selectivity or rejection.
Fee £30:00 including all components installed and I.F.aligned with Marconi test equipment.
Cobraworxshopz.com - Back2Spec Alignment.
Start a fresh with your Transceiver - Factory Specification 'Back2Spec' . Fee £20:00 includes PLL, Receiver RX, RF output stage TX and Marconi Alignment.
For mods number 1 to 9 please call us for your specific requirements and our latest pricing.
How do I book-in my Transceiver??
Simple, just call 07508-148-148 or ouside UK +44-7508-148-148 to discuss your specific requirements.
How do I Pay?
Cobraworxshopz.com accept Cash or Cheque only for Transceiver work. Our minimum charge is £20 for Technicians time plus return postage of £22.00. An initial payment of £42.00 is to be included when sending us your Transceiver. If any parts/spares are required we will contact you before progressing, for your approval. Please include in with your Transceiver your contact details (name, address, Home/mobile number, email address etc) and information about required work. Unless requested please only send the Transceiver, no Mic, bracket, power lead etc.
Secure Post and Packaging
Cobraworxshopz.com use Royal Mail, Next-Day, Special Delivery before 1PM (Tracked) 'Signed-for' and insured to a maximum of £500 for your Transceiver. Don't forget your initial payment of £42.00 includes the return postage charge of £22.00 already!.
Cobraworxshopz uses State-of-the-Art Hardware and Software, allowing us to offer a Service to program/re-map any type of EPROM IC in Bulk or individually. (see below*)
Cobraworxshopz Technicians have the very latestHardware and Software to enable us to program any EPROM (Electronically Programmable Read Only Memory) IC upto and including 40-pin devices.
Applications include;
Microprocessor Control Systems
Motor Vehicle ECU (Electronic Control Unit) Mapping
Transceiver Conversions
Remote Control Systems
If you are a Customer looking to program just one EPROM or a Business with Bulk programming/erasing requirements, please contact Cobraworxshopz.com to see how much time and money we can save you.